AntiSplatAero.com
Where safety is a reality.

Products



 "The Nose Job"                                               $379.00
The Nose Job

Anti-Splat-Aero is very proud to offer this new revolutionary product ( THE NOSE JOB ) as a partial solution to the nose gear leg fears of many RV-A model builders, current owners and potential buyers of these wonderful aircraft. After watching, reading, analyzing, researching and waiting for someone to offer up a solution we decided to go to work on the problem. Our effort turned out to be far greater in monetary and time investment than we initially planned but, all good things take time. After approximately a year of design, engineering and testing many different configurations, learning and improving along the way. We now feel our product is the most logical, simple and inexpensive device that can be manufactured and installed in an effort to address these gear leg concerns. This product allows the Van’s nose gear leg to function as designed without interfering with its dynamics or operation in any way. The product only comes into play when the forces on the gear leg, if allowed to increase further, would become greater than the gear leg was designed to see or handle without permanent damage to itself or the aircraft. Through extensive testing we determined this point and included a 20% safety factor. When operating your aircraft from an unimproved surface i.e. grass, dirt, poor runway surface or in an emergency off field landing this device could help prevent a costly repair, a propeller strike, engine disassembly for inspection or other damage may be avoided not to mention a dreaded possible flip over we have seen so many times. Our product has been discussed in great depth with hundreds of posts, comments, questions, answers and opinions on all of the forums for Vans RV aircraft and others that use this same gear leg. A vast amount of information is available there and makes for some very interesting as well as informative reading. We also have two videos here in our video section of our web site that shows the product being installed and tested. Please have a look at them as well. Our introductory price for the complete kit with a new fairing is only $379.00  Plus shipping, $14.00  & $5.00 for each additional kit on orders shipped to the USA. California sales add 8 percent state sales tax.

 PayPal to:     Info@AntiSplatAero.com

For credit card orders or further information see our “Contact Us” page.


 Inflatable Lumbar / Back Support                 $29.99
 Inflatable Lumbar / Back Support

We finally received our shipment and they are now available for sale to the RV-ers and aviation community. After trying out a lumbar support a friend had installed in his airplane and feeling firsthand the support and comfort it provided. We went on line and purchased one of every type and configuration from several different manufacturers. We then tried each one out and decided on what we considered the best for comfort, installation, durability and ease of use. We then contacted the manufacturer and requested they make a few modifications to create the ideal, inflatable back and lumbar support for use in our airplanes. So here it is, the custom Anti-Splat-Aero inflatable lower back / lumbar support, that was created special for you and your RV airplane. They have the perfect length strap to secure them to your seat back, under, over or inside the seat cushion. The hose and pump ball with release valve is the ideal size and length so it can be placed on either side of your seat for ease of operation. The entire assembly only weighs a few (6) ounces. They are a small firm foam pillow that measures 6.5”x 12.0” that provides comfort and support even when not inflated. With just a few squeezes of the pump or a touch of the air valve your seat is completely transformed and feels like a luxury car seat. We currently offer the product in black, dark blue and burgundy colors to match most interiors. This ASA back support is constructed with materials that meet not only the federal standards but the riged California standards for flammability as well. Through our purchasing of a large quantity we can offer this fabulous product to you and your passengers at this very reduced price. Aircraft Spruce sells a somewhat comparable product for twice as much but this one is nicer and more adapted to the RV airplanes. Give it a try and if you don’t agree we will take it back. Anti-Splat-Aero price, only $29.99 Plus shipping $5.00 & $2.00 for each additional ordered item.
California sales, add $2.39 state sales tax.

PayPal to: Info@AntiSplatAero.com and get free tracking.

For credit card orders or further information see our “Contact Us” page


 Axle & Nose Fork Nut Wrench                        $19.99
Axle

….These are our newest specialty wrenches we developed specifically for the RVers, that simplifies some of the maintenance tasks. This very light weight tool is designed to fit the axle or spindle nuts, as well as the nose gear break away tension nut on the nose fork. This tool is laser cut .125”, heat treated, aircraft grade 4130 chromoly steel, plated to eliminate corrosion. We offer these in the 1-1/2” size that fits all models except the RV-10 and a 1-3/4” version to fit the RV-10. Please be sure to specify the size you require when ordering. Because it is very thin, it allows you to rotate the nuts while inserting the cotter keys, thus eliminating all the trial and error positioning the nut. It seems that most people try to use a giant, heavy Crescent wrench or a pair of Channel-Lock pliers that will damage the nuts and only make the task more difficult. Give it a try and if you don’t agree, (as with any of our tools) we will take it back. Anti-Splat-Aero price, only $19.99 Plus shipping $5.00 & $2.00 for each additional wrench order. California sales, add $1.60 state sales tax.

PayPal to: Info@AntiSplatAero.com and get free tracking.

For credit card orders or further information see our “Contact Us” page

 Oil Filter Wrench                                              

 $19.99 

Oil Filter Wrench


We have finally finished our testing and created our demonstration video. These very versatile, revolutionary oil filter wrenches are now available for sale to the aviation community and aircraft enthusiasts. After trying to utilize several other tools (commercially as well as homemade) and feeling rather frustrated with the varying degrees of success, we decided there was definitely a need for another improved product. We went on line and purchased or viewed every type and configuration from several different manufacturers. We tried each design out and decided on what we considered needed improvement. We then decided to manufacture our own incorporating many improvements’ and additions just like we did on our propeller wrench. This approach enabled us to start with a clean slate and create a product unlike the others. In this we were able to create the ideal tool for this job. So here it is, our custom built Anti-Splat-Aero “Oil Filter Tool”. This wrench was created special for you and your airplane. This tool is small, lightweight and easy to use making your filter servicing and installations fast and easy. With very little effort your oil filter can be removed or run in and torqued. We have a video here in our videos page on our web site that shows the product being used. This super wrench is constructed with materials that are very strong, (4130 heat treated steel) then electroplated to meet our standards and will provide you with years of service. Through our manufacturing of a large quantity we can offer this fabulous product to you at this much reduced price. Have a look at the video here in our video section, demonstrating this quality tool.  Give it a try and as with all our products, if you don’t agree we will take it back. Anti-Splat-Aero price, only $19.99 Plus shipping $5.00 & $2.00 for each additional wrench order. California sales, add $1.60 state sales tax.


PayPal to: Info@AntiSplatAero.com and get free tracking.

For credit card orders or further information see our “Contact Us” page



 

“THE ASA OIL SEPARATOR”

                    $169.00

 

THE ASA OIL SEPARATOR


Anti-Splat-Aero is very proud to offer this new very much improved product “THE ASA OIL SEPARATOR” as a solution to the oil consumption and collection of oil on the belly of your aircraft. I for one was tired of lying on my back, trying to clean the bottom of my airplane. The breathers kick out oil mist that collects on the belly that in turn grabs all the dust and dirt. I purchased a similar looking unit from another manufacturer, installed it and it made little if any improvement. Looking at all the other available and similar products, with prices ranging from $250.00 to $850.00 we decided to create one that actually works and is affordable. For years we have been making this type of product used in automotive racing engines so the leap to a light weight aircraft unit was a small one. After many hours on the dynamometer many changes and hours of flight testing the effort was well worth it.  We now can offer for sale this very light weight (about 7.5 oz.) “ASA Oil Separator” that in our tests out performs most of the competition at a fraction of the price. We are convinced our unit is the most logical, simple and inexpensive device that can be manufactured and installed in an effort to address these breather oil issues. This great little unit installs in minutes and will pay for itself in oil savings alone. The product allows the engine to function and breath as designed without interfering with its dynamics or operation in any way. The oil separator simply removes the oil from the blow-by stream and vents off the moisture and acids that can potentially harm your engine. This type of product has been discussed in great depth with hundreds of posts, comments, questions, answers and opinions on all of the forums and many web sites as well. A vast amount of information is available there and makes for some very interesting as well as informative reading. We at Anti-Splat-Aero didn’t try to re-invent this product, we simply improved it and manufacture it at a realistic price.  Full installation and maintenance instructions will be included. We also have a video or slide show presentation here on our that shows the product being made and tested. Please have a look at this as well. For the time being we are offering this product in white powder coat, polished mirror finish or bare for you to paint as desired (Please specify when ordering). As with all of our products and services give it a try, if you are not happy we will cheerfully refund your money. Our introductory price for the complete unit with mounting bracket and clamp assembly is only $169.00 Plus shipping, $8.00 & $2.00 for each additional ordered, shipped to the USA. California sales add 8 percent state sales tax.

PayPal to:     Info@AntiSplatAero.com


For credit card orders or further information see our “Contact Us” page.


 RV License Plate Frame                $19.99
RV License Plate Frame

 RV Hanger Door Plaque                $19.99
RV Hanger Door Plaque

We at Anti-Splat-Aero are proud to offer a few more new goodies (THE RV LICENSE PLATE FRAMES & RV HANGER PLAQUES) as a way to advertise and show off your toy. Our efforts turned out to be well worth the time as we were able to introduce these two great accessories that seem very popular. These are laser cut from high quality steel not pot metal or cast aluminum. We offer all of these in gloss black or gloss white powder coating or raw, if you wish to paint it yourself as you prefer. Please have a look at our other products and videos while here on our site. As with all our products, if you are not happy, we aren’t happy, and we will cheerfully refund your money for any reason.  Our introductory price for the “RV License Plate Frames” or the “RV Hanger Door Plaque” is only $19.99 ea. Plus shipping, $7.00 & $2.00 for each additional on orders shipped to the USA. California sales add 8% state sales tax.

PayPal to:     Info@AntiSplatAero.com

For credit card orders or further information see our “Contact Us” page.


Almost a RV-14 Seating Mod       $179.00
Almost a RV-14 Seating Mod


Here is our newest addition to the family of Vans RV accessories and products. “THE ALMOST a 14” seating modification. This very inexpensive easy to install kit can make your airplane feel like it grew-up providing an all-around roomier cockpit and adding to the enjoyment and comfort of you and your passengers every time you fly your airplane. This will make your RV-6, RV-7 or RV-9 slider feel as spacious as a RV-14 and save you 40K or 50K dollars, not to mention thousands of hours of work. You can install this kit in an hour or two and get years of use from it without breaking the bank. Every one of these installed so far gets the same reaction, “Why didn’t I do this a long time ago?” Everyone who sits in a plane with this modification wants one for their RV. Please have a look at the video here in the video section and see what you think. See supplemental video for RV-6. Give us a call or e-mail us with any questions or suggestions in regards to this or any of our products. As with all of our products and services you can’t go wrong, if you are unhappy for any reason we will cheerfully refund your money. Our introductory price for the complete kit  is only $179.00  Plus shipping, $14.00  & $5.00 for each additional kit on orders shipped to the USA. California sales add 8 percent state sales tax. Please be sure when ordering to specify RV-6, RV-7, or RV-9 slider. (Not available for tip-up at present time)

PayPal to:     Info@AntiSplatAero.com

For credit card orders or further information see our “Contact Us” page.



 V/S Bracket Mod                           $54.00
VERTICAL STABILIZER BRACKET MOD


We at Anti-Splat-Aero are excited to offer another new product, (THE VERTICAL STABILIZER BRACKET MOD.) to add considerable strength and structure to the mounting of the vertical stabilizer. Some reports of this mounting bracket developing cracks in two different areas have surfaced and at least in my case was cause for some concern.  The vertical stabilizer is definitely not something you can do without so we decided to beef-up it’s attach point, in turn eliminating the prospect of it failing. Though to our knowledge, no tails have fallen off yet, we think it prudent to be sure this potential point of failure is eliminated. Our new brackets are laser cut from very strong and tough, type 301 high tensile aircraft grade stainless sheets (UNS S30-100). This is a much more desirable material for the mounting application. When in a hard slip, rapid yaw movements, any aerobatic maneuver that ads stress to the V/S like snap rolls or worst case point rolls or knife edge flight this area is really stressed to the limits. Our new very light, 3.5 oz. simple, easy installed and inexpensive bracket system accomplishes this beef-up in just a few minutes. This can put to rest fears of many RV-7/8/9 model builders, current owners and potential buyers of these wonderful aircraft. We looked at several different possible methods of accomplishing this and decided to add to, rather than replace, the mounting. This makes the modification very simple, no riveting, painting or external changes. This product allows the Van’s V/S to function as designed without interfering with its original mounting in any way. The product only adds considerable strength and much peace of mind into the equation. Our products have been discussed in great depth with hundreds of posts, comments, questions, answers and opinions on all of the forums for Vans RV aircraft. A vast amount of information is available there and makes for some very interesting as well as informative reading. We also have some videos here in our videos page of our web site that shows this product being installed and tested. Please have a look at them as well. Give us a try and as with all our products and services, if you don’t agree we will cheerfully take it back no questions asked. When you wish to order please give us a call, as we need some specific information about your airplane to ensure the perfect fit. Our introductory price for this modification is only $54.00 Plus shipping, $7.00 & $1.00 for each additional on orders shipped to the USA. California sales add 8% state sales tax.

PayPal to:     Info@AntiSplatAero.com

For credit card orders or further information see our “Contact Us” page

Oxy-meter 02 & Pulse                                       $32.99
Oximeter 02

The Anti-Splat-Aero pulse oximeter or saturometer is our latest safety device offering, that can indirectly monitor the oxygen saturation of a pilot or passengers blood (as opposed to measuring oxygen saturation directly through a blood sample) and changes in blood volume in the skin, producing a photoplethysmograph. It is often carried in or attached to a location in your airplane where it is readily accessible to the occupants so they can test oxygenation at any time during flight at altitude. I have one attached with Velcro to the instrument panel in all my airplanes. This devise will instantly show you a need for oxygen as well as determine there is no need, thus saving oxygen and money. Our monitors also display the heart rate, are very portable and battery-operated. Our meters feature auto shut-off, this provides hundreds of hrs. battery life on two AAA alkaline batteries. A very fast reading, bright digital display, storage case, lanyard and very complete operating instructions. If you operate your aircraft at altitudes over 8’000 feet, you should have this devise in your aircraft. Because of their simplicity and speed, pulse oximeters are also very useful for occupants with respiratory or cardiac problems, especially COPD. Our blood-oxygen monitors display the percentage of arterial hemoglobin in the oxyhemoglobin configuration. Acceptable normal ranges for aircraft occupants are from 90 to 99 percent, any reading below 90 percent would indicate the need for supplemental oxygen. Values of 100 percent can also indicate the onset of carbon monoxide poisoning. Many people find they are compromised at relatively low altitudes, so at this low price, why not be sure and safe? Just one oxygen tank refill will pay for two or three of these!

Anti-Splat-Aero price, only $32.99 Plus shipping $5.00 & $2.00 for each additional meter order.

California sales, add $2.64 state sales tax.

PayPal to: Info@AntiSplatAero.com and get free tracking.

For credit card orders or further information see our “Contact Us” page.



"The Lip-Skid"                                                 

 $89.00 

The Lip-Skid

We at Anti-Splat-Aero are proud to offer another new product (THE LIP SKID) as a partial solution to some of the nose gear leg fears of many RV-A model builders, current owners and potential buyers of these wonderful aircraft. Our efforts turned out to be well worth the time and energy as we were able to introduce two revolutionary products. After approximately a year of design, engineering and testing many different configurations, learning and improving along the way. We now feel our newest product (THE LIP SKID) in conjunction with “THE NOSE JOB” is the most logical, simple and inexpensive device that can be manufactured and installed in an effort to address these gear leg concerns. These products allow the Van’s nose gear leg to function as designed without interfering with its dynamics or operation in any way. The products only come into play when the forces on the gear leg become greater than it was designed to see or handle without permanent damage to itself or the aircraft. When operating your aircraft from an unimproved surface i.e. grass, dirt, poor runway surface or in an emergency off field landing this devise could help prevent a costly rebuild or repair. A propeller strike, engine disassembly for inspection or other damage may be avoided not to mention a dreaded possible flip over we have seen so many times. Our products have been discussed in great depth with hundreds of posts, comments, questions, answers and opinions on all of the forums for Vans RV aircraft. A vast amount of information is available there and makes for some very interesting as well as informative reading. We also have some videos here in our videos page of our web site that shows the product being installed and tested. Please have a look at them as well. Our introductory price for the LIP SKID is only $89.00 Plus shipping, $8.00 & $2.00 for each additional LIP SKID on orders shipped to the USA. California sales add 8% state sales tax.

PayPal to:     Info@AntiSplatAero.com

For credit card orders or further information see our “Contact Us” page.


Ultimate Propeller Wrench                               $69.99
Ultimate Propeller Wrench

We have finally finished our testing and created our demonstration video. These very versatile, revolutionary design propeller wrenches are now available for sale to the aviation community and aircraft enthusiasts. After trying to utilize several other prop wrenches (commercially as well as homemade) and feeling rather frustrated with the varying degrees of success, we decided there was definitely a need for an improved product. We went on line and purchased or viewed every type and configuration from several different manufacturers. We tried each design out and decided on what we considered needed improvement. We then decided to manufacture our own incorporating many improvements’ and additions. This approach enabled us to start with a clean slate and create a product unlike any of the others. In this we were able to create the ideal multi-function tool for this job. So here it is, the custom built Anti-Splat-Aero constant speed propeller wrench that was created special for you and your airplane. This tool is available in 3/4" and 5/8" sizes, its small, lightweight and easy to use making your propeller servicing and installations fast and easy. With just a few flicks of your wrist the bolts are started and easily run in and torqued. This super wrench is constructed with materials that are very strong, (4130 heat treated steel) then electroplated to meet our standards and will provide you with years of service. Through our manufacturing of a large quantity we can offer this fabulous product to you at this much reduced price. Hartzell actually sells a wrench at upwards of $650, I think Sensenich has one $260, we have seen several at just under $100. Avery tool has a wrench around our pricing but it is basically just a crow’s foot, Aircraft Spruce sells a somewhat comparable product to theirs for twice our price but ours is nicer and more adapted to actual use on airplanes. Have a look at the video here in our video section, demonstrating this quality tool.  Give it a try and as with all our products, if you don’t agree we will take it back. Anti-Splat-Aero price, only $69.99 Plus shipping $5.00 & $2.00 for each additional wrench order. California sales, add $5.60 state sales tax.

PayPal to: Info@AntiSplatAero.com and get free tracking.

For credit card orders or further information see our “Contact Us” page


Nose Wheel Bearing Mod            $210.00
Ultimate Propeller Wrench

We at Anti-Splat-Aero are proud to offer another new service, (THE NOSE WHEEL BEARING MOD) as a partial solution to some of the nose gear leg fears of many RV-A model builders, current owners and potential buyers of these wonderful aircraft. Our efforts turned out to be well worth the time and energy as we were able to introduce two revolutionary products. After approximately four months of design, engineering and testing, learning and improving along the way. We now feel our newest service (THE NOSE WHEEL BEARING MOD) in conjunction with “THE NOSE JOB” and “LIP-SKID” offers the most logical, simple and inexpensive improvements that can be utilized  in an effort to address these gear leg concerns and violent shimmy issues. These products allow the Van’s nose gear leg to function as designed without interfering with its dynamics or operation in any way. Our products have been discussed in great depth with hundreds of posts, comments, questions, answers and opinions on all of the forums for Vans RV aircraft. A vast amount of information is available there and makes for some very interesting as well as informative reading. We also have several videos here in our videos page of our web site that shows this service being performed. Please have a look at all the videos as they are very informative. As with all of our products and services give it a try, if you are not happy we will cheerfully refund your money.  Our price for the THE NOSE WHEEL BEARING MOD is only $210.00 material and labor. Should your tire need truing and precision balance that will add $25.00, plus shipping $16.00 & on orders shipped to the USA. California sales add 8% state sales tax.

PayPal to:     Info@AntiSplatAero.com

For credit card orders or further information see our “Contact Us” page.


Oil Separator Install Kit                  $52.00
Oil Separator Install Kit


Anti-Splat-Aero is very proud to offer this installation kit that complements our product “THE ASA OIL SEPARATOR”. We have had many requests for these items in this simple kit and realize that it may be difficult for many people to obtain these items locally. So, by popular demand here is a complete installation kit with everything we think you may need to install the separator and vacuum valve assembly.  Included are three feet of high quality silicone hose, four stainless clamps, one steel braid -4 AN Teflon oil return hose, one -4 AN X 1/8”  NPT 90 Deg. Fitting and one 1/8” X 3/8” NPT reducer bushing that fits the oil return in the accessory case on most Lycoming engines. Full installation and maintenance instructions will be included. We also have a video or slide show presentation here on our videos page that shows the products being made, tested and installed. Please have a look at this as well. As with all of our products and services give them a try, if you are not happy we will cheerfully refund your money. Our price for the complete installation kit is only $52.00 Plus shipping, $8.00 & $2.00 for each additional ordered, shipped to the USA. California sales add 8 percent state sales tax.

PayPal to:     Info@AntiSplatAero.com

For credit card orders or further information see our “Contact Us” page.


 Crankcase Vacuum Valve              $75.00
Crankcase Vacuum Valve

Anti-Splat-Aero is very proud to offer this very reliable crankcase vacuum valve and 321 stainless steel fitting that will put the finishing touch on your oil separator installation. This special valve in conjunction with our installation kit, complements the main product “THE ASA OIL SEPARATOR”. We have had many requests for these items to enhance the installation and realize that it may be very difficult for many people to obtain these items locally. Full installation and maintenance instructions will be included. We intended to have a video or slide show presentation here on our videos page but we have been so busy that hasn’t happened. Please have a look at this valve as well when ordering a separator. This one way vacuum check valve accomplishes a number of things, (all being good) and greatly enhances performance of your aircraft. I will attempt to touch on some of the benefits here. Should you have questions or require more information just give us a call. This assembly, when fitted to your engine will create a vacuum in the crankcase of 5 or 6 inches when in operation. It accomplishes this via two separate actions, # 1 exhaust flow over the bias cut tube, and # 2 the pumping action of the engine crankcase volume changing with rotation. The one way valve allows the crankcase to exhale only, and this action creates a low pressure in the crankcase. The engine is sealed and the only air path in is through the piston ring end gap or the valve guides. This usually cuts oil consumption in half, or stops it all together, as the afore stated areas are where the losses occur. Your engine will virtually stop all leaks and seeping when in service, due to the vacuum inside. This system stops any possibility of freezing up the breather in cold climates, as no moisture laden air is present in the engine and none can be inhaled through the overboard draft tube. The rarefied air and low pressure in the crankcase has a very dramatic effect on windage and oil in suspension, thus freeing up a little power and adding some efficiency. This will also greatly lower the boiling point of any moisture that finds it’s way into the engine. Any oil temperature over 160 degrees will get rid of all the moisture in turn the acids. Any lowering of pressure on the underside of the pistons is exactly the same as adding cylinder pressure on top. This results in a very noticeable power increase (on the average 180 HP engine, 6 to 8 HP). We hear this over and over with reports of higher static rpm, better climb and acceleration, lower fuel burn etc.  The belly of your airplane will stay immaculately clean as anything that exits the separator will be consumed in the exhaust stream. This all sounds too good to be true! Well it is true and we know you will love this system. As with all of our products and services give them a try, if you are not happy for any reason, we will cheerfully refund your money. Our price for the valve and fitting is only $75.00 Plus shipping, $7.00 & $2.00 for each additional ordered, shipped to the USA. California sales add 8 percent state sales tax..

PayPal to:     Info@AntiSplatAero.com

For credit card orders or further information see our “Contact Us” page.

 The Snapper                                   $7.99
Almost a RV-14 Seating Mod


….This is our newest specialty tool we developed specifically for the RVers at the suggestion of a couple of the forum members with first hand experience. After a bit of investigation we learned there was a need for this and how important its function is. This little tool could really save the day in the event of a flip over in your RV. We learned that almost all flip overs result in the canopy being broken and cracked. At first glance one would say that is a good thing, and should help facilitate a speedy exit. Not the case, it seems the partially broken canopy has sharp shards of Plexiglas that are impossible to break off with your bare hands. We were told this over and over again when conducting our survey. We made several different prototypes and tested them for ease of operation and effectiveness, with this design being the all-around top performer. This very small, lightweight (less than two oz.) aluminum escape tool when carried in your airplane could really save the day. It makes short work of breaking away the shards of plastic up to ¼” thick. This tool is laser cut .125”, heat treated, aircraft grade aluminum, de-burred, and tumbled to eliminate sharp edges. Because it is very thin, it allows you to carry it in your plane with just a piece of Velcro to hold it in a location where it is easily accessible should you find the need for it. Give this a try and if you don’t agree, (as with any of our tools or products) we will take it back no questions asked. Anti-Splat-Aero price, only $7.99 Plus shipping $2.50 or free with an additional product order. California sales, add $.64 state sales tax.

PayPal to:     Info@AntiSplatAero.com

For credit card orders or further information see our “Contact Us” page.

Website Builder